About MoxaProductsSolutionsSupport & ServiceNews & EventsWhere to BuyPartner Zone

You are here: Home > Products > Multiport Serial Boards > PCI Boards > CP-204J  
 
CP-204J
4-port RS-232 PCI Board
Quickview
View Larger Picture
Features Datasheet (PDF)
Specifications Documentation & Drivers
Ordering Information

PCI board with 4 RS-232 ports
Suitable for fast response transactions and 24/7 service
Drivers provided for all major operating systems
 
 
Introduction
 
MOXA CP-204J, which uses a lot less cabling than other systems, is specifically designed for embedded systems, PC-based machines, and other space-critical applications. Unlike the fan-out cable or external connection box used by most other products, the CP-204J multiport serial board, with its built-in RJ45 bracket design, not only saves cable layout space, but also reduces cost. This makes it ideally suited for PC-based embedded system applications such as POS, Kiosk, and ATM.

Other outstanding features of the CP-204J multiport serial board, such as its state-of-the-art ASIC design, on-board RISC processor (TI TMS320) and large I/O buffer (512 KB), make it possible for CP-204J to use minimal system resources. This makes it suitable for applications that involve fast response transactions, as well as applications that must provide reliable 24-hour service.

Benefits

  • Compact design size, perfect for embedded systems
  • More layout flexibility, saving cabling space and cost

Applications

  • PC-based POS devices
  • PC-based postal machines
  • PC-based ATMs
  • PC-based lottery machines
  • PC-based kiosks
  • Embedded industrial machines
  • Other embedded system applications
Back to Top
Features
On-board RISC-based processor
Large I/O buffer (512 KB)
Low repair rate with ASIC design
Built-in RJ45 connectors on the bracket
On-chip hardware flow control
No switches or jumpers—easy to configure by software
Works perfectly with all major operating systems
 
Back to Top

Specifications
Hardware
Processor
TMS320C203 RISC processor
I/O Controller
16C550C or compatible x 4, each with 16 byte Tx/Rx FIFO
Memory
512 KB
Connector Type
10-pin RJ45
 
Interface
Bus
PCI Ver. 2.1 (32-bit)
Serial
RS-232
No. of Ports
4
Signals
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
 
Performance
Speed
50 bps to 921.6 Kbps
Max. No. of Ports
16 (4 boards)
 
Configuration
Parity
None, even, odd, space, mark
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
IRQ
Assigned by BIOS
 
Operating Systems
CP-204J
Windows 2000/XP/2003, Windows NT, Windows NT Alpha, Windows 95/98/ME, DOS, Linux 2.4.x (x86), QNX
 
Power and Environment
Power Requirements
390 mA (+5V), 40 mA (+12V), 70 mA (-12V)
Operating Temperature
0 to 55°C
Operating Humidity
5 to 95% RH
Storage Temperature
-20 to 85°C
Dimensions (W x D x H)
160 x 95 x 16 mm
Regulatory Approvals
FCC, CE
 

Ordering Information
 
CP-204J
  • PCI bus, 4-port RJ45 intelligent RS-232 board
  • MOXA software CD-ROM: contains drivers and
        MOXA PComm Lite serial comm development tool
  • User's Manual
  •  
    Optional Accessories
    150 cm RJ45 to female DB25 RS-232 cable
    150 cm RJ45 to male DB25 RS-232 cable
    150 cm RJ45 to male DB9 RS-232 cable
    150 cm RJ45 to female DB9 RS-232 cable
     

    Home | About Moxa | Products | Solutions | Support & Service | News & Events | Partner Zone | Where to Buy | Contact Moxa | Sitemap