| |
 |
EtherDevice™ Switch
EDS-508 Series
Industrial 8-port Managed Redundant
Ethernet Switches |
|
 |
Quickview |
 |
|
|
|
 |
 |
Fast Ethernet Redundant Ring Capability (< 300 ms) |
|
Couple several Turbo Rings for distributed applications |
|
IGMP Snooping for filtering multicast traffic |
|
VLAN to ease network planning and QoS to increase determinism |
|
Port Trunking for flexible network connections |
|
-40 to 75蚓 operating temperature (-T models) |
|
| |
|
| |
|
Introduction |
|
|
| |
The MOXA EtherDevice™ Switch EDS-508 Series consists of 8-port Ethernet Switches designed especially for industrial applications. With their high performance switching engine, redundant Ethernet ring capability, and dynamic status report ability, you can be confident that your industrial automation system will keep running continuously.
EDS-508 Series' useful device management and network management functions make it easy for you to master your automation Ethernet network, and the rugged hardware design makes these products suitable for use in demanding industrial environments.
Moreover, the easy web browser and Windows utility configuration options ensure quick and accurate installation.
More info >>
|
|
 Back to Top |
|
Features |
|
|
|
 |
Advanced Industrial Networking Capability |
| |
|
Redundant Fast Ethernet Ring Capability (recovery time < 300 ms at full load) |
| |
|
IGMP Snooping for filtering multicast traffic from industrial Ethernet Protocols |
| |
|
Supports IEEE 802.1Q VLAN and GVRP protocol to ease network planning |
| |
|
Supports QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism |
| |
|
Port Trunking for optimum bandwidth utilization |
| |
|
SNMP V1/V2c/V3 for different levels of network management security |
|
|
Designed for Industrial Applications |
| |
|
Bandwidth management prevents unpredictable network status |
| |
|
Lock port for authorized only MAC address access |
| |
|
Port mirroring for online debugging |
| |
|
Automatic warning by exception through email, relay output |
| |
|
Digital inputs to integrate sensors and alarms with IP networks |
| |
|
Automatic recovery of connected device's IP addresses |
| |
|
Line-swap fast recovery (Patented) |
| |
|
Redundant, dual DC power inputs |
| |
|
-40 to 75蚓 operating temperature range |
| |
|
IP 30, rugged high-strength case |
| |
|
Long-haul transmit distance of 40 km or 80 km |
| |
|
DIN-Rail or panel mounting ability |
| |
|
Configurable by Web browser, Telnet/Serial console, Windows utility |
| |
|
Send ping commands to identify network segment integrity |
|
|
Recommended Software and Accessories |
| |
|
SNMP OPC Server Pro |
| |
|
DR-4524, DR-75-24, DR-120-24 DIN-Rail 24 VDC Power Supply Series |
|
|
| |
Back
to Top
|
|
Specifications
|
|
|
|
| Technology |
|
|
|
| IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1W, 802.1Q, 802.1p |
|
|
|
|
| IGMP V1/V2/V3 device, GVRP, SNMP V1/V2c/V3, DHCP Server/Client, BootP, TFTP, SNTP, SMTP, RARP, and EDS-SNMP OPC Server Pro (Optional) |
|
|
|
|
| MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB |
|
|
|
|
| IEEE802.3x flow control,back pressure flow control |
|
|
|
|
| |
| Interface |
|
|
|
| 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
|
|
|
|
| 100BaseFX ports (SC/ST connector) |
|
|
|
|
|
|
|
| Power, Faults, ACT, LNK, 10/100, Master, coupler |
|
|
|
|
| Two relay outputs with current carrying capacity of 1A @ 24 VDC |
|
|
|
|
Two inputs with the same ground, but electrically isolated from the electronics
For state "1": +13 to +30V
For state "0": -30 to +3V
Max. input current: 8 mA |
|
|
|
|
| |
| Optical Fiber |
|
|
|
Multi mode:
0 to 5 km, 1310 nm (50/125 µm, 800 MHz*km)
0 to 4 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode:
0 to 15 km, 1310 nm (9/125 µm, 3.5 PS/nm*km)
0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/nm*km)
0 to 80 km, 1550 nm (9/125 µm, 19 PS/nm*km) |
|
|
|
|
Multi mode: -20 dBm
Single mode: 0 to 15 km, -15 dBm; 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm |
|
|
|
|
Multi mode: -14 dBm
Single mode: 0 to 15 km, -6 dBm; 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm |
|
|
|
|
| -36 to -32 dBm (Single); -34 to -30 dBm (Multi) |
|
|
|
|
| |
| Power |
|
|
|
| 24 VDC (12 to 48 VDC), redundant dual inputs |
|
|
|
|
0.29A: (EDS-508),
0.43A: (EDS-508-MM-SC, EDS-508-SS-SC, EDS-508-MM-ST) |
|
|
|
|
| Two removable 6-pin terminal blocks |
|
|
| Overload Current Protection |
|
| Present, can withstand 1.6A |
|
|
| Reverse Polarity Protection |
|
|
|
|
| |
| Mechanical |
|
|
|
| IP30 protection, metal case |
|
|
|
|
| 80.5 x 135 x 105 mm (W x H x D) |
|
|
|
|
|
|
|
| DIN-Rail, Wall Mounting (optional kit) |
|
|
|
|
| |
| Environmental |
|
|
|
0 to 60蚓 (32 to 140蚌) for standard models
-40 to 75蚓 (-40 to 167蚌) for -T models |
|
|
|
|
| -40 to 85°C (-40 to 185°F) |
|
|
| Ambient Relative Humidity |
|
| 5% to 95% (non-condensing) |
|
|
|
|
| |
| Regulatory Approvals |
|
|
|
| UL60950 (E212360), UL 508 (Pending), CSA C22.2 No. 60950, EN60950 |
|
|
|
|
UL/cUL Class 1, Division 2, Groups A, B, C, and D (E238559)
ATEX Class 1, Zone 2, EEx nC IIC (03CA24537) |
|
|
|
|
| FCC Part 15, CISPR (EN55022) class A |
|
|
|
|
EN61000-4-2 (ESD), Level 3
EN61000-4-3 (RS), Level 3
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 3
EN61000-4-6 (CS), Level 3
EN61000-4-8, EN61000-4-11, EN61000-4-12 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
Ordering
Information
|
|
|
| |
| Standard Operating Temperature Models (0 to 60°C) |
|
 EDS-508
|
|
| Industrial Redundant Ethernet Switch with 8 10/100BaseT(X) ports |
|
|
EDS-508-MM-SC
|
|
| Industrial Redundant Ethernet Switch with 6 10/100BaseT(X) ports, 2 multi mode 100BaseFX ports,
SC connector |
|
|
EDS-508-MM-ST
|
|
| Industrial Redundant Ethernet Switch with 6 10/100BaseT(X) ports, 2 multi mode 100BaseFX ports,
ST connector |
|
|
EDS-508-SS-SC
|
|
| Industrial Redundant Ethernet Switch with 6 10/100BaseT(X) ports, 2 single mode 100BaseFX ports,
SC connector |
|
|
EDS-508-SS-SC-80
|
|
| Industrial Redundant Ethernet Switch with 6 10/100BaseT(X) ports, 2 long-haul (80 km) single mode 100BaseFX ports,
SC connector |
|
|
|
| |
| Extended Operating Temperature Models (-40 to 75°C) |
|
|
EDS-508-T
|
|
| Industrial Redundant Ethernet Switch with 8 10/100BaseT(X) ports |
|
|
EDS-508-MM-SC-T
|
|
| Industrial Redundant Ethernet Switch with 6 10/100BaseT(X) ports, 2 multi mode 100BaseFX ports,
SC connector |
|
| EDS-508-MM-ST-T |
|
| Industrial Redundant Ethernet Switch with 6 10/100BaseT(X) ports, 2 multi mode 100BaseFX ports, ST connector |
|
|
EDS-508-SS-SC-T
|
|
| Industrial Redundant Ethernet Switch with 6 10/100BaseT(X)ports, 2 single mode 100BaseFX ports,
SC connector |
|
|
EDS-508-SS-SC-80-T
|
|
| Industrial Redundant Ethernet Switch with 6 10/100BaseT(X) ports, 2 long-haul (80 km) single mode 100BaseFX ports,
SC connector |
|
|
|
| |
| Optional Accessories |
|
|
|
| CD with EDS-SNMP OPC Server Software and Manual |
|
|
|
| 45W/2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input |
|
|
|
| 75W/3.2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input |
|
|
|
| 120W/5A DIN-Rail 24 VDC Power Supply with 88 to 132 VAC/176 to 264 VAC input by switch |
|
|
WK-46
|
|
|
|
|
| |
|
|
|
