|
|
 |
NPort 5610/5630
16/8-port RS-232/422/485 Rackmount Serial Device Servers |
|
 |
Quickview |
 |
|
|
|
 |
 |
World's Leading LCM Display Rackmount Serial Device Servers |
|
Comes with built-in TCP/IP protocol and all the operation modes you'll ever need |
|
Easy installation and configuration—the closest you'll ever get to a plug-n-play device server |
|
| |
|
| |
|
Introduction |
|
|
| |
Make up to 16 RS-232/422/485 Serial Devices Internet Ready
NPort 5600 Series provides a convenient and transparent way to establish an Ethernet connection that not only protects your current hardware investment, but also ensures future network expandability. Perform some simple configuration tasks, and you''ll be ready to network your existing serial devices. Moreover, NPort 5600 can transparently transmit data bi-directionally between the serial and Ethernet interfaces. By using NPort 5600, you can centralize serial device management and distribute management hosts at the same time.
19-inch Rackmount Device Server
NPort 5600 has a professional cabinet design, with Tx/Rx LEDs for all ports on the front panel, and the 8/16 RJ45 connectors on the rear panel.This makes NPort 5600 suitable for standard 19-inch rack mounting, simplifying operation, maintenance, and administration.
Real COM/TTY Ports
After installing the real COM/tty driver that comes with NPort 5600, the serial ports on NPort 5600 are recognized as Real COM ports by the Windows operating system, or real tty ports by Linux environments. NPort provides both the basic transmit/receive data functions, as well as RTS, CTS, DTR, DSR, and DCD control signals.
Useful LED Indicators
The System LED, Serial Tx/Rx LEDs, and Ethernet LED on the connector help field engineers analyze field problems, and provide a simple way to ease monitoring tasks. NPort 5600's LEDs not only indicate current system and network status, but also assist the field engineer in monitoring the status of attached serial devices.
> See figure on More info page...
More info >>
|
|
 Back to Top |
|
Features |
|
|
|
 |
Easy-to-use LCM (Liquid Crystal Module) interface for IP address configuration |
|
|
Standard 19-inch rack-mountable |
|
|
Auto-detecting 10/100 Mbps Ethernet |
|
|
16/8 RS-232 or RS-422/485 ports |
|
|
Surge protection for all serial signals (15 KV ESD) |
|
|
Supports TCP Server, TCP Client, UDP, and Real COM Modes |
|
|
Supports web and Telnet consoles |
|
|
Supports SNMP MIB-II for network management |
|
|
| |
Back
to Top
|
|
Specifications
|
|
|
|
| LAN |
|
|
|
| 10/100 Mbps, RJ45, Auto MDI/MDIX |
|
|
|
|
| Built-in 1.5 KV magnetic isolation |
|
|
|
|
| |
| NPort 5610 Serial Interface |
|
|
|
|
|
|
|
|
|
|
|
|
| TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
|
|
|
| 15 KV ESD for all signals |
|
|
|
|
| |
| NPort 5630 Serial Interface |
|
|
|
|
|
|
|
|
|
|
|
|
RS-422: Tx+, Tx-, Rx+, Rx-, GND
4-wire RS-485: Tx+, Tx-, Rx+, Rx-, GND
2-wire RS-485:Data+, Data-, GND |
|
|
|
|
| 15 KV ESD for all signals |
|
|
|
|
| Patented Automatic Data Direction Control (ADDC™) |
|
|
|
|
| |
| Power Line Protection |
|
|
|
| |
| Optical Fiber |
|
Multi mode: 0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km) |
|
|
|
Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm |
|
|
|
Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm |
|
|
|
| -36 to -32 dBm (Single), -34 to -30 dBm (Multi) |
|
|
|
|
| |
| Advanced Built-in Features |
|
|
|
| LCM display with four push buttons |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Serial Communication Parameters |
|
|
|
| None, Even, Odd, Space, Mark |
|
|
|
|
|
|
|
|
|
|
| RTS/CTS/DTR/DSR (NPort 5610 only), XON/XOFF, |
|
|
|
|
| 50 bps to 921.6 Kbps Software Features |
|
|
|
|
| |
| Software Features |
|
|
|
ICMP, IP, TCP, UDP, DHCP, BootP, Telnet, DNS,
SNMP, HTTP, SMTP, SNTP, PPP, SLIP, RTelnet, RFC2217 |
|
|
|
|
| NPort Administration Suite for Windows 95/98/ME/NT/2000/XP/2003/Vista |
|
|
|
|
| Windows 95/98/ME/NT/2000/XP/2003/XP x64/2003 x64 COM driver, Linux real TTY driver, SCO Unix,SCO OpenServer 5, UnixWare 7, UnixWare 2.1.x, SVR4.2,QNX |
|
|
|
|
| Web/Telnet Console, or Windows Utility |
|
|
|
|
| |
| Power Requirements |
|
|
|
|
100 to 240 VAC, 47 to 63 Hz or
±48 VDC (38 to 72 VDC, -38 to -72 VDC)
|
|
|
|
|
NPort 5610-8/16: 141 mA @ 100 VAC, 93 mA @ 240 VAC
NPort 5610-8/16-48V: 135 mA @ 48 VDC
NPort 5630-8/16: 152 mA @ 100 VAC, 98 mA @ 240 VAC
|
|
|
|
|
| |
| Mechanical |
|
|
|
|
|
|
480 x 45 x 198 mm (including ears)
440 x 45 x 198 mm (without ears) |
|
|
|
|
NPort 5610-8: 3.34 kg
NPort 5610-16: 3.42 kg
NPort 5630-8: 3.38 kg
NPort 5630-16: 3.40 kg |
|
|
|
|
| |
| Environmental |
|
|
|
| 0 to 55°C (32 to 131°F), 5 to 95% RH |
|
|
|
|
| -20 to 75°C (-4 to 167°F), 5 to 95% RH |
|
|
|
|
| |
| Regulatory Approvals |
|
|
|
CE: EN55022 Class A/EN 55024
IEC 61000-4-12 (for NPort 5610-16, NPort 5610-8-48)
FCC: FCC Part 15 Subpart B Class A |
|
|
|
|
| UL: UL60950-1,CUL, TÜV: EN60950-1 |
|
|
|
|
|
|
NPort 5610-8: 97924 hours
NPort 5610-16: 94928 hours
NPort 5630-8: 118405 hours
NPort 5630-16: 91483 hours |
|
|
|
|
| |
|
|
Ordering
Information
|
|
|
| |
 NPort 5610-16
|
|
| 16-Port RS-232 Serial Device Server, 141 mA @ 100 VAC, 93 mA @ 240 VAC |
|
|
NPort 5610-16-48V V2
|
|
| 16-port RS-232 Serial Device Server, 135 mA @ 48 VDC |
|
|
NPort 5610-8
|
|
| 8-Port RS-232 Serial Device Server, 141 mA @ 100 VAC, 93 mA @ 240 VAC |
|
|
NPort 5610-8-48V V2
|
|
| 8-port RS-232 Serial Device Server, 135 mA @ 48 VDC |
|
|
NPort 5630-16
|
|
| 16-Port RS-422/485 Serial Device Server, 152 mA @ 100 VAC, 98 mA @ 240 VAC |
|
|
NPort 5630-8
|
|
| 8-Port RS-422/485 Serial Device Server, 152 mA @ 100 VAC, 98 mA @ 240 VAC |
|
|
|
| 1 Serial Device Server
Quick Installation Guide
NPort Documentation and Software CD-ROM
Power Cord (included with AC version of the product) |
|
|
|
| |
| Optional Accessories |
|
|
|
| RJ45 8-pin to DB9 Male cable, 150 cm |
|
|
|
| RJ45 8-pin to DB9 Female cable, 150 cm |
|
|
|
| RJ45 8-pin to DB25 Male cable, 150 cm |
|
|
|
| RJ45 8-pin to DB25 Female cable, 150 cm |
|
|
|
| |
|
|
|
